United Kingdom
España
Portugal (English)
WISMEC Reuleaux RX2 21700 230W TC MOD 8000mAh
The WISMEC Reuleaux RX2 21700 supports max 230W output with a 1.3-inch large screen. This pack comes with dual Avatar AVB 21700 batteries.
In stock
SKU
WISMEC Reuleaux RX2 21700 230W TC MOD 8000mAh
As low as
€53.00
Designed by Jaybo, the WISMEC Reuleaux RX2 21700 is a compact yet powerful vaping device with max 230W output power. It's compatible with both 21700 and 18650 cells (with battery sleeve). With a 1.3-inch large screen, the RX2 20700 presents all parameters (including dual separate battery bars) in a more clear way. Together with 2A fast charging, dual circuit protection, upgradeable firmware with timeout settings, all make the RX2 21700 a outstanding box MOD. This pack comes with two Avatar 21700 batteries.
Specifications:
- Size: 46.0 x 37.1 x 81.7mm
- Display: 1.3 inch
- Output mode: VW/TC(Ni, Ti, SS)/TCR mode
- Output wattage: 1 - 230W
- Temperature range: 100 - 315°C/ 200-600°F
- Max charging current: 2A
- Max output current: 50A
- Output voltage range: 0.5 - 9V
- Resistance range: 0.05ohm - 1.5ohm for TC modes, 0.1omh - 3.5ohm for VW modes
- Cell type: 2 x 4000mAh Avatar 21700 Batteries (included)/high rate 18650 cell with battery sleeve
- Thread: 510 spring-loaded connector
Features:
- Max 230W output with dual 21700/18650 cells
- Push-pull design for easy battery installation
- 1.3-inch large display with separate battery bars
- 2A max charging current for quick charge
- Battery balance charge system
- Dual circuit protection & reverse polarity protection
- Upgradeable firmware with timeout settings
Contents:
- 1x RWISMEC Reuleaux RX2 21700 MOD
- 2x 4000mAh Avatar 21700 Batteries
- 2x 18650 battery sleeves
- 1x QC USB Cable
- 1x User Manual
| Country of Manufacture | |
|---|---|
| Manufacturer | Wismec |
| Volume | No |
Write Your Own Review
Since the TPD (Tobacco Products Directive) has come into effect, manufacturers have found a clever new way of producing e-liquid in bottles larger than 10ml - these are known as short fill bottles. These bottles can be any size (normally 60ml, 100ml or 120ml) and have free space in the bottle for a nicotine booster to be added. The short-fill e-liquid itself is nicotine-free, and the basic idea is to add your required strength of nicotine as a shot in the top of the bottle, then shake to combine the two. A 120ml short-fill bottle will contain 100ml of juice, leaving 20ml of space for 2 nicotine boosters - resulting in a 120ml mixed bottle. 60ml bottles will contain 50ml of juice, leaving 10ml of space for the nicotine to be added.
For example, if you are used to a nicotine content of 3mg, then simply add one 10ml 18mg bottle of nicotine solution to 50ml of e-liquid. For 100ml of e-liquid then it would require 2 bottles of nicotine. Once the nicotine is added to the e-liquid you will need to seal and then shake the bottle for around 4 - 5 minutes to ensure that the nicotine has been mixed in. If possible, it is advised to do this more than once and leave the liquid for 24 hours to ensure it has mixed correctly.
We have included a table below to show you in simple terms how much nicotine needs to be added to the short-fill for a bottle of 3mg.
| Short Fill Bottle Size | Nicotine Shot | Final Bottle |
| 60ml (Contains 50ml) | 1 x 10ml 18mg Shot | 60ml 3mg |
| 120ml (Contains 100ml) | 2 x 10ml 18mg Shot | 120ml 3mg |
The bottles come with a secure plastic cap which can be removed with either a small screwdriver or set of pliers. Once the nicotine has been added, please ensure that the plastic cap is put firmly back in place to avoid spilling any liquid.
United Kingdom
Spain (Spanish)
Portugal
Czech Republic
Slovakia